Overview

The AELAB DD4-MC tabletop PRP/CGF/FAT centrifuge performs programmed centrifugation for PRP tube preparation with a 7-inch touch screen display and PRP/PRF/CGF program interface. The DD4-MC centrifuge is designed for one-touch operation: after entering the program, the centrifugation process is automatically completed, supporting standardized laboratory PRP/CGF/FAT processing.

The AELAB DD4-MC tabletop PRP/CGF/FAT centrifuge integrates microprocessor control, electronic door lock control, and a one-touch door opening device. The DD4-MC centrifuge includes protection from imbalance, lid-lock, and over-speed, and displays error codes on the screen to support controlled centrifuge operation in laboratory and clinical workflows.

⚙️ Design & Construction

The AELAB DD4-MC tabletop PRP/CGF/FAT centrifuge uses a compact benchtop enclosure with a front-mounted 7-inch touch colored panel for direct method selection and parameter control. The DD4-MC centrifuge incorporates electronic door lock control and a one-touch door opening device to stabilize access control during PRP tube centrifugation. A UV lamp mounted on the door lid supports safer procedural handling during routine PRP/CGF/FAT centrifuge workflows.

🔬 Working Principle / Testing Method

The AELAB DD4-MC tabletop PRP/CGF/FAT centrifuge separates sample fractions by applying controlled relative centrifugal force (RCF) generated by regulated rotor speed. The DD4-MC centrifuge uses microprocessor control to regulate set time (0–99 min) and manage acceleration/deceleration behavior as configured by the program, completing centrifugation automatically after program entry. Integrated monitoring detects imbalance and over-speed conditions, locks the lid, and reports error codes on the DD4-MC display for controlled PRP tube processing.

💡 Key Advantages

• AELAB DD4-MC tabletop PRP/CGF/FAT centrifuge provides one-touch program operation with touchscreen workflow control for PRP/PRF/CGF processing
• DD4-MC centrifuge achieves maximum speed 4000 r/min and maximum RCF 3050 × gfor PRP tube centrifugation
• Microprocessor control and frequency conversion brushless AC motor design supports stable speed regulation during PRP/CGF/FAT centrifuge runs
• DD4-MC centrifuge protection functions include imbalance detection, lid-lock, and over-speed monitoring with on-screen error code display
• Programmable timing 0–99 min supports repeatable PRP tube processing cycles across laboratory protocols
• UV lamp on the DD4-MC door lid supports safer procedural handling during routine operation
• Multiple swing rotor options enable the DD4-MC centrifuge to fit different PRP tube and syringe formats by inserting adapters

🔗 Connectivity & Integration

The AELAB DD4-MC tabletop PRP/CGF/FAT centrifuge integrates a touchscreen control interface for direct parameter entry, program selection, and on-screen fault reporting. The DD4-MC centrifuge supports method repeatability through stored program operation and automated completion after program entry, aligning with controlled laboratory workflows where operator steps must be minimized.

🧪 Testing Applications

The AELAB DD4-MC tabletop PRP/CGF/FAT centrifuge is used for PRP tube preparation and fraction separation workflows that require regulated centrifugation time and controlled RCF. The DD4-MC centrifuge supports laboratory and clinical sample preparation where standardized PRP/PRF/CGF protocols are applied, including routine processing of compatible PRP tubes and syringe-based formats using the available swing rotor options.

Compliance & Quality Assurance

The AELAB DD4-MC tabletop PRP/CGF/FAT centrifuge includes operational safety controls such as electronic door lock control, imbalance protection, lid-lock, and over-speed monitoring with error code reporting for controlled laboratory centrifuge operation. Programmed, automated completion after parameter entry supports consistent centrifuge execution and procedure repeatability for PRP tube processing. (Formal ISO/CE/GLP certification markings are not stated in the provided source and should be verified in QA.)

For laboratories standardizing PRP tube processing, the AELAB DD4-MC tabletop PRP/CGF/FAT centrifuge provides controlled speed, RCF, and timed automation in a compact benchtop format.

Specifications